Dax Wireless Access Point [Dx-921ABO-PE]

Be the First to Review
Specifications
Dimension (H x W x D)265 162 17 mmBrandDax StandardsIEEE 802.11n/ IEEE 802.11b/gReceiver Sensitivity-50 dbm minimumSecurity FeaturesIIEEE 802.1x Authentication, MAC address Authentication, MAC filtering, Access control list, WEP (WEP64, WEP128) encryption, WPA-802.11iMax Wireless Transmit Power100mW (20dBm)CertificationFCC, CEProduct Features10/100/1000 Base-T Gigabit Ethernet, IEEE802.11n access, 300Mbps maximum throughput, 3 SMA connectors for connecting up to 5dbi Antenna, Centralized management via Wireless Access Controller (Dx-921ABO-PE) IPv6 ready, Support AP auto upgrade, User isolation policy, Seamless roamingPowerExternal power adapter, Input: 110-240V AC, Output: 12V DC, 1.5ANetwork ManagementSNMP,CLI(Telnet), SSH HTTP/HTTPs; MAIPU cable and wireless integrated intelligent wireless controller HTTP/ TFTP upgrade AP softwarePower Consumption9.9 WConfiguration ManagementSupport local log, Syslog, log file exporting, Alarming function, Fault detection, Statistics information, Watch dog, Remote MaintenancePoe802.3af /802.3atAp Access Rate802.11n:20MHz BW: 6,5, 7.2, 13, 14.4, 19.5, 21.7, 26, 28.9, 39, 43.3, 52, 57.8, 58.5, 65, 72.2, 78, 86.7, 104, 115.6, 117, 130, 144Mbps 40MHz BW: 13.5, 15, 27, 30, 40.5, 45, 54, 60, 81, 91, 108, 120, 121.5, 135, 140, 150, 162, 180, 216, 240, 243, 270, 300Mbps 802.11g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1Mbps 802.11b: 11, 5.5, 2, 1MbpsVirtual Ap Bssid16WLANs/channelHumidity5%~95% non condensingSoftware FeaturesVLAN as per IEEE 802.1Q, Quality of service as per IEEE 802.11e WMM, Minimum four level of priority queues, Traffic classifications, Traffic, Limitations, Multicasting support with IGMP snooping, Rate limiting / Bandwidth Limitation, Load balancing based on AP user traffic, Seamless roaming support, Minimum 16 Virtual Access point channels, SSID hiding function, Access point switch over function, IPv6 readyWorking Frequency802.11b,802.11g,802.11n: 2.4120GHz~2.4725GHzIndoor Range50 MeterRadio Frequency InterfaceThree RP-SMA interfaces, configured with three 5dBi wholedirectional antennas by default